Control of the Reaction Kinetics of Monodispersed InP/ZnSeS/ZnS-Based Quantum Dots Using Organophosphorus Compounds for Electroluminescent Devices.

Green emissive InP-based quantum dots (QDs) remain less developed than red QDs because of the difficulty of controlling the reactivity of small InP cores. Herein, we report the synthesis of monodispersed green InP-based QDs using tris(dimethylamino)phosphine, a considerably inexpensive and safer phosphorus source compared to conventional tris(trimethylsilyl)phosphine. An organophosphorus compound, trioctylphosphine, was used to control the reaction kinetics by slowing the progression of the nucleation process, which weakened the aggregation behavior of the clusters and improved the size distribution. The synthesized green emissive InP/ZnSeS/ZnS QDs exhibited a photoluminescence (PL) peak at 515 nm with an enhancement of the full width at half-maximum from 66 to 46 nm and the PL quantum yield from 61% to 70%. An electroluminescent device was fabricated, and the electron transport layer was optimized by changing the layer thickness. The optimized device structure improved the charge balance and increased the external quantum efficiency from 2.1% to 3.5%.

Enhancing the efficiency of solution-processed inverted quantum dot light-emitting diodes via ligand modification with 6-mercaptohexanol.

In this Letter, the surface hydrophilicity of the quantum dot (QD) emitting layer (EML) was modified via a ligand exchange to prevent QD EML damage upon hole transport layer (HTL) deposition for all-solution-processed inverted QD-light-emitting diodes (QLEDs). The conventional hydrophobic oleic acid ligand (OA-QDs) was partially replaced with a hydrophilic 6-mercaptohexanol (OH-QDs) through a one-pot ligand exchange. Owing to this replacement, the contact angle of a water droplet on the OH-QD films was reduced to 71.7° from 89.5° on the OA-QD films, indicating the conversion to hydrophilic hydroxyl ligands. The OH-QD EML maintained its integrity without any noticeable damage, even after HTL deposition, enabling all-solution processing for inverted QLEDs with well-organized multilayers. Inverted QLEDs with the OH-QD EMLs were compared with those with OA-QD EMLs; the maximum current efficiency of the device with the OH-QD EML significantly improved to 39.0 cd A-1 from 5.3 cd A-1, and the peak external quantum efficiency improved to 9.3% from 1.2%, which is a seven-fold increase over the OA-QD device. This approach is believed to be effective for forming solid QD films with resistance to chlorobenzene, a representative HTL solvent, and consequently contributes to high-efficiency all-solution-processed inverted QLEDs.

Synthesis of Blue-Emissive InP/GaP/ZnS Quantum Dots via Controlling the Reaction Kinetics of Shell Growth and Length of Capping Ligands.

The development of blue-emissive InP quantum dots (QDs) still lags behind that of the red and green QDs because of the difficulty in controlling the reactivity of the small InP core. In this study, the reaction kinetics of the ZnS shell was controlled by varying the length of the hydrocarbon chain in alkanethiols for the synthesis of the small InP core. The reactive alkanethiol with a short hydrocarbon chain forms the ZnS shell rapidly and prevents the growth of the InP core, thus reducing the emission wavelength. In addition, the length of the hydrocarbon chain in the fatty acid was varied to reduce the nucleation kinetics of the core. The fatty acid with a long hydrocarbon chain exhibited a long emission wavelength as a result of the rapid nucleation and growth, due to the insufficient In-P-Zn complex by the steric effect. Blue-emissive InP/GaP/ZnS QDs were synthesized with hexanethiol and lauryl acid, exhibiting a photoluminescence (PL) peak of 485 nm with a full width at half-maximum of 52 nm and a photoluminescence quantum yield of 45%. The all-solution processed quantum dot light-emitting diodes were fabricated by employing the aforementioned blue-emissive QDs as an emitting layer, and the resulting device exhibited a peak luminance of 1045 cd/m2, a current efficiency of 3.6 cd/A, and an external quantum efficiency of 1.0%.

Polyethylenimine-ethoxylated dual interfacial layers for highly efficient and all-solution-processed inverted quantum dot light-emitting diodes.

Inverted quantum dot light-emitting diodes (QLEDs) were fabricated through all-solution processing by sandwiching quantum dot (QD) emitting layers (EMLs) between dual polyethylenimine-ethoxylated (PEIE) layers. First, a PEIE layer as EML protecting layer (EPL) was formed on a QD EML to protect the EML from the hole transport layer (HTL) solvents and to facilitate the formation of a well-organized structure in the all-solution-processed inverted QLEDs. Second, another PEIE layer was introduced as an electron-blocking layer (EBL) on the zinc oxide (ZnO) electron transport layer (ETL) and effectively suppressed the excessive electron injection to the QD EML, thereby enhancing device efficiency.

Pancreatic Lymphoepithelial Cysts Diagnosed with Endosonography-guided Fine Needle Aspiration.

Although lymphoepithelial cysts (LECs) of the pancreas are benign lesions, most of them have been treated with surgical resection due to diagnostic difficulty. We report a 66-year-old woman diagnosed with pancreatic LECs. Abdominal ultrasound revealed two masses in the pancreas, which were not visible on the abdominal computed tomography. In an abdominal magnetic resonance imaging, pancreas lesions showed solid tumors, which revealed a low signal intensity on T1-, moderate high signal intensity on T2 weighted images, and homogeneous delayed enhancement in the portal venous phase. Endosonography (EUS) revealed two hypoechoic round masses measuring 1.5 cm and 4.5 cm in the body and tail of the pancreas, respectively. EUS-guided fine needle aspiration (FNA) revealed squamous cells, amorphous keratinous debris, and lymphocytes. The patient was diagnosed with LECs of the pancreas. For the duration of the follow-up period of two years, imaging studies were unchanged. EUS-FNA is useful in making a definite diagnosis and avoiding unnecessary surgery. This is the first case of pancreatic LECs diagnosed with EUS-FNA in Korea.

Duodenal Loop Obstruction as an Unusual Cause of Acute Pancreatitis: A Case Series.

Duodenal loop obstruction is an unusual cause of acute pancreatitis. Increased intraluminal pressure hinders pancreatic flow, causing dilatation of the pancreatic duct and inducing acute pancreatitis. We experienced three cases of acute pancreatitis that resulted from duodenal loop obstruction after (1) an esophagectomy with gastric pull-up procedure for esophageal cancer, (2) a gastrectomy with Billroth I reconstruction for gastric cancer, and (3) a gastrojejunostomy for abdominal trauma. An abdominal CT scan revealed a distended duodenal loop, dilated pancreatic duct, and inflamed pancreas with fluid collection. Acute pancreatitis with duodenal loop obstruction was diagnosed by abdominal pain, elevated serum amylase/lipase, and abdominal CT findings. Immediate decompression with a nasogastric tube was performed, and all patients showed improvement within one week after admission. Each patient was followed up for more than two years without recurrence. Our findings suggest the usefulness of nasogastric tube decompression as the first line of treatment for acute pancreatitis related to duodenal loop obstruction.